User`s guide

Contents ▲ 79 ▼ Index
The measured samples are marked with a green check, and only these are stored in the
chip data file.
The unmeasured samples are marked with a white cross on red ground.
3 If you want to immediately view the results in the Data and Assay context, select the
Select file in Data Context check box.
4 Click OK.
The dialog box is closed.
• If you selected Select file in Data Context, you are automatically taken to the Data and
Assay context, where you can view, analyze, and evaluate the results (if any) of your
chip run (see “Displaying the Measurement Results (Electrophoresis)” on page 82 and
“Analyzing and Evaluating the Results of an Electrophoretic Assay” on page 91).
• If you did not select the Select file in Data Context check box, you are taken back to the
Instrument context, where you can start the next chip run, for example.