User`s guide

Contents ▲ 70 ▼ Index
Loading the Electrophoresis Chip into the Bioanalyzer
After preparing the chip, you can insert it into the Agilent 2100 bioanalyzer.
To load the chip into the bioanalyzer:
1 Open the lid.
NOTE
Before inserting the chip, check that the electrode cartridge is installed and the chip
selector is in position “1”. For details, refer to “Switching Between Electrophoretic
and Flow Cytometric Assays” on page 47.
2 Place the prepared chip into the receptacle.
The chip fits only one way. Do not use force.
Chip selector
in position “1”
Chip