User`s guide

Contents ▲ 453 ▼ Index
Electropherogram View
In Grid View, you see electropherograms of all samples (including ladder) at the same
time. The electropherogram of the selected sample is surrounded by a black rectangle.
The small gel view on the lower panel (see “Lower Panel” on page 398) highlights the
associated well.
In Single View, you can overlay the electropherograms of different samples from one chip
run. For comparing samples from different chip runs, refer to “Comparing Samples from
Different Electrophoretic Chip Runs” on page 136.
In both views (Single View and Grid View), you can zoom in to see the data in the graphs
more closely. Click and drag the mouse to draw a rectangle that bounds the area you
wish to view in more detail. This area will enlarge to fill the display area. Unzoom by
double-clicking or using the undo zoom tool. The dividing line between the
electropherogram graph(s) and the sub-tabs at the bottom can be moved in the vertical
direction, giving more or less space to either area.
The electropherograms are labeled with the sample name.
To the right of the electropherogram(s), a gel-like image of the (selected) sample is
shown, which you can use also for zooming into the electropherograms.
On sub-tabs, you can find analyzed data for each individual sample. For further analysis,
you can use the setpoint explorer on the right to modify data analysis setpoints.
When a new chip run starts, the electropherogram will at first be blank. As data is
acquired, electropherograms are drawn one by one, and result tables are filled with
analyzed measurement data.