User`s guide

441
Specifications
General Information
Specifications (oscilloscope option)
The specifications are the performance standards against which the
1670G-series logic analyzers oscilloscope is tested.
* = Specifications valid within +/-10 °C of self-calibration temperature
** Specification applies at the maximum sample rate. At lower rates,
specification should be +/-(0.005% x ∆t) + (2 x 10-6 x delay setting) +
(0.15 X sample interval) for bandwidth limited signals (tr = 1.4 x
sample interval). Sample interval is defined as .
Bandwidth*: dc to 500 MHz (realtime, dc coupled)
Time Interval Measurement
Accuracy*, **:
+/-[(0.005% of ∆t) + (2 x 10
-6
* delay
setting) + 150 ps]
DC Offset Accuracy*: +/-(1.0% of channel offset + 2.0% of
full scale)
Voltage Measurement
Accuracy*:
+/-[(1.25% of full scale + offset
accuracy) + (0.016 x V/div)]
Trigger Sensitivity*:
dc to 50 MHz: 0.063 * full scale
50 MHz to 500 MHz: 0.125 * full scale
Input R: 1 MΩ +/-1%,50 Ω +/-1%
1
samplerate
-----------------------------