Product specifications

CI868 and TP867 – IEC 61850 Interface Appendix A Hardware Units
338 3BSE036351-510 A
Indicators
There are six LED indicators on the front panel of CI868 that indicate various states
and conditions on the CI868.
Technical Data
Table 100. IEC 61850 Interface CI868 - LED indicators
Designation/Color Function
F(ault) / Red The red F(ault) LED indicates a fault condition on CI868.
Reset turns the F LED on. Software can turn it on and off
via a register in the CEX-Bus controller.
R(un) / Green The green R(un) LED indicates that CI868 is operational.
Reset turns the LED off. Software can turn the LED on
and off via a register in the CEX-Bus controller.
RxTx1 / Yellow The yellow Rx/Tx1 LED is intended to be lit to indicate a
receiving/transmitting telegram at Ch1. The LED is
controlled by Ethernet PHY. It is turned off by reset.
RxTx2 / Yellow The yellow Rx/Tx2 LED (LED will always be switched
OFF) is intended to be lit to indicate a
receiving/transmitting telegram at Ch2(The channel is
disabled). The LED is controlled by Ethernet PHY. It is
turned off by reset.
PRIM(ary) The PRIM LED is ON when the module is used in a single
configuration (CI868 does not support redundant
configuration).
Table 101. IEC 61850 Interface CI868 - Technical Specification
Item Value
Ty p e Ethernet unit
Protocol IEC 61850