Product specifications

CI868 and TP867 – IEC 61850 Interface Appendix A Hardware Units
336 3BSE036351-510 A
CI868 and TP867 – IEC 61850 Interface
Key Features
• CEX-Bus Module.
• MPC862P 96MHz.
• 32 MB SDRAM with integrity check.
• 4 MB Flash PROM.
• Ethernet/IEEE 802.3u supporting full Fast Ethernet
10/100Mbps operation.
• Support IEC 61850 protocol
• 10/100 Mbps use IEEE standard Media Independent
Interface (MII)
Description
The CI868 can be used to connect an AC 800M controller
to external Ethernet devices using IEC 61850 protocol.
The TP868 Baseplate has two RJ45 Ethernet connectors,
where CH1 connector can use 10Mbps or 100Mbps
(Mega bits/sec.).The baseplate has a code lock
(see Table 4 on page 75) that prevents the installation of
an incorrect type of unit onto the TP867 Baseplate.
The CI868 expansion unit contains the CEX-Bus logic, a communication unit and a
DC/DC converter that supplies appropriate voltages from the +24 V supply via the
CEX-Bus. The Ethernet cable must be connected to the main network through an
Ethernet Switch.