Technical data

U7232A DisplayPort Electrical Performance Compliance Test Application 5
In This Book
This manual describes the tests that are performed by the DisplayPort
Electrical Performance Compliance Test Application in more detail; it
contains information from (and refers to) the DisplayPort Specification
Version 1.1, and it describes how the tests are performed.
• Chapter 1, “Installing the DisplayPort Electrical Performance
Compliance Test Application shows how to install and license the
automated test application (if it was purchased separately).
• Chapter 2, “Preparing to Take Measurements shows how to start the
DisplayPort Electrical Performance Compliance Test Application and
gives a brief overview of how it is used.
• Chapter 3, “Source Eye Diagram Differential Tests shows the probing
and test procedure of the source data eye diagram differential tests.
• Chapter 4, “Source Total Jitter Differential Tests shows the probing and
test procedure of the source total jitter differential tests.
• Chapter 5, “Source Non- ISI Jitter Differential Tests shows the probing
and test procedure of the source non- isi jitter differential tests.
• Chapter 6, “Source Transition Time Differential Tests (Informative)
describes the source rise time and fall time differential tests. These are
informative tests.
• Chapter 7, “Source Non Pre- Emphasis Level Differential Tests describes
the source non Pre- Emphasis level differential tests.
• Chapter 8, “Source Overshoot Differential Tests (Informative) shows the
probing and test procedure of the source overshoot differential tests.
These are informative tests.
• Chapter 9, “Source Pre- Emphasis Level Differential Tests (Normative &
Informative) shows the probing and test procedure of the source
pre- Emphasis differential tests. The Pre- Emphasis Level tests are
normative tests whereas Non- Transition Voltage Range Measurements
are informative tests.
• Chapter 10, “Source Inter Pair Skew Differential Tests shows the
probing and test procedure of the source inter pair skew differential
tests.
• Chapter 11, “Source Unit Interval Differential Tests (Informative)
describes the source unit interval differential tests. These are
informative tests.
• Chapter 12, “Source Main Link Frequency Compliance Differential Tests
shows the probing and test procedure of the source main link frequency
compliance differential tests.
• Chapter 13, “Source Spread Spectrum Clocking (SSC) Differential Tests
(Normative & Informative) describes the source spread spectrum
clocking (SSC) differential tests. In this SSC test, the Modulation