Technical data
1
U7232A DisplayPort Compliance Testing Notes 5
In This Book
This manual describes the tests that are performed by the DisplayPort
Electrical Performance Compliance Test Application in more detail; it
contains information from (and refers to) the DisplayPort Specification
Version 1, and it describes how the tests are performed.
• Chapter 1, “Installing the DisplayPort Electrical Performance
Compliance Test Application shows how to install and license the
automated test application (if it was purchased separately).
• Chapter 2, “Preparing to Take Measurements shows how to start the
DisplayPort Electrical Performance Compliance Test Application and
gives a brief overview of how it is used.
• Chapter 3, “Source Eye Diagram Testing shows the probing and test
procedure of the data eye pattern tests.
• Chapter 4, “Source Total Jitter Tests contains more information on the
source total jitter tests.
• Chapter 5, “Source Non- ISI Jitter Tests contains more information on
the source non- isi jitter tests.
• Chapter 6, “Source Transition Time Tests describes the rise time and
fall time tests.
• Chapter 7, “Source No Pre- emphasis Level Verification Testing describes
the no pre- emphasis level verification tests.
• Chapter 8, “Source Pre- emphasis Level Verification Testing describes the
pre- emphasis level verification tests.
• Chapter 9, “Source Frequency Accuracy Tests describes the source
frequency accuracy tests.
• Chapter 10, “Source Inter- Pair Skew Tests describes the source
inter- pair skew differential tests.
• Chapter 11, “Source Rise And Fall Time Mismatch Tests describes
source intra- pair skew single- ended tests.
• Chapter 12, “Source Intra- Pair Skew Tests describes source intra- pair
skew single- ended tests.
• Chapter 13, “Source AC Common Mode Noise Tests describes source AC
common mode noise tests.
• Chapter 14, “Calibrating the Infiniium Oscilloscope and Probe describes
how to calibrate the oscilloscope in preparation for running the
DisplayPort automated tests.
• Chapter 15, “InfiniiMax Probing describes the 1168A/1169A probe
amplifier and probe head recommendations for DisplayPort testing.