Technical data

128 U7232A DisplayPort Compliance Testing Notes
13 Source AC Common Mode Noise Tests
PASS Condition
AC Common Mode Noise = Nominal Frequency ±300 ppm.
Test R ef er en ce s
See Test 3.10: AC Common Mode Noise, in the DisplayPort- Compliance
Test Specification Version 1.
Spread Spectrum Clock (SSC)
SSC Acquisitions Sets the number of acquisitions taken to verify the SSC.
Single-ended Tests
Rise-Fall Mismatch
Rise-Fall Mismatch Edge Sets the number of edges measured for the rise-fall mismatch test.
Upper Threshold (Debug
only)
Sets the upper threshold used to make a rise time or fall time
measurement.
Lower Threshold (Debug
only)
Sets the lower threshold used to make a rise time or fall time
measurement.
Intra-pair Skew
Intra-pair Edge Sets the number of edges measured for the intra-pair skew test.
AC Common Mode
AC Common Edge Sets the number of edges measured for the AC common mode test.
Table 14 Test Configuration Options
Configuration Option Description