Technical data

Source Intra-Pair Skew Tests 12
U7232A DisplayPort Compliance Testing Notes 119
PASS Condition
Intra- pair Skew ≤ 30 ps
Test R ef er en ce s
See Test 3.5: in the DisplayPort- Compliance Test Specification Version 1.
Rise-Fall Mismatch Edge Sets the number of edges measured for the rise-fall mismatch test.
Upper Threshold (Debug
only)
Sets the upper threshold used to make a rise time or fall time
measurement.
Lower Threshold (Debug
only)
Sets the lower threshold used to make a rise time or fall time
measurement.
Intra-pair Skew
Intra-pair Edge Sets the number of edges measured for the intra-pair skew test.
AC Common Mode
AC Common Edge Sets the number of edges measured for the AC common mode test.
Table 13 Test Configuration Options
Configuration Option Description