User`s guide

32 34450A User’s Guide
2 Functions and Features
Math Operations
Table 2- 1 below describes the math operations that can be
used with each measurement function.
• Only one math operation can be turned- on at a time.
• Math operation does not support external triggering.
• Hold operation does not support fast mode.
• In the dual display mode, selecting the math operation
will apply to the primary measurement function and turn
off the secondary function.
• Range and resolution changing is allowed for all math
operations.
• The reference/offset/limit values used for the Null, Limit,
dB, and dBm math functions are editable.
• For remote operation, refer to the CALCulate Subsystem
in the Agilent 34450A Programmer’s Reference Helpfile.
Table 2-1 Math operations
Math
Function
Measurement Function
DCV ACV DCI ACI Ω FREQ DIODE CONT TEMP CAP
Null
9
99999 - - 99
Limit 999999- - 99
Hold 999999- - 99
dB 99 - - - - - - - -
dBm 99 - - - - - - - -
Stats 999999 - - 99
34450A UG.book Page 32 Tuesday, July 23, 2013 2:43 PM