Technical data

List of Error Messages 9
Error Messages
U3606A User’s and Service Guide 265
Calibration errors
The following errors indicate failures that may occur during a calibration.
644 Constant Current 0.2V/1kohm error
645 Constant Current 0.2V/10kohm or amplified 11 error
646 Constant Current 0.8V/100kohm or amplified 11 error
647 Constant Current 0.8V/1.1Mohm or amplified 11 error
Table 9 - 6 List of self-test errors (continued)
Error code Error message
Table 9 - 7 List of calibration errors
Error code Error message
701 Cal security pads short
702 Cal secured
703 Invalid secure code
704 Secure code too long
705 Cal aborted
706 Cal value out of range
707 Cal signal measurement out of range
708 Cal signal frequency out of range
709 No cal for this function or range
710 EEPROM write failure
720 Cal DCV offset out of range
721 Cal DCI offset out of range
722 Cal RES offset out of range
723 Cal CAP offset out of range