Technical data

1Getting Started
Introduction
2 U3606A User’s and Service Guide
Introduction
The Agilent U3606A Multimeter|DC Power Supply unit is a combination of
a 5½ digit digital multimeter and a 30 W single output dual- range
DC power supply with a square- wave generator. These two distinctive
modules are able to work simultaneously (excand independently, providing
an efficient, convenient, and affordable testing solution.
The U3606A has the dimensions of 2½U (rack unit) high, and provides the
flexibility for bench or rack- mounted use.
The front panel controls allow you to set the measurement parameters,
mathematical operations, output parameters, protection features, and
instrument settings.
The rear panel includes a GPIB and USB interface connector, as well as
output terminals capable of remote sensing.
When operating over the remote interface, the U3606A functions as both a
listener and a talker. Using an external controller (such as a PC), you can
instruct the U3606A to make a measurement, output a source, or send
data back over the GPIB or USB interfaces.
Measurement features
• 5½ digit, 120000 count
• Voltage and current measurement — DC, AC (true- rms), and AC+DC
• 2- wire resistance measurement up to 100 MΩ
• 4- wire low- resistance measurement (100 mΩ to 10 Ω)
• Continuity and diode test
• Frequency, pulse width, and duty cycle measurement — via the voltage
path or via the current path
• Capacitance measurement
• Auto and manual ranging
• Mathematical operations for null, decibel (dBm and dB) measurements,
statistics (MinMax), limit, and hold
• Triggering for local and remote operation