User manual

2.3.45 AcqrsD1_configMultiInput
Purpose
Selects the active input when there are multiple inputs on a channel. It is useful for Averagers, Analyzers,
and some digitizer models.
Parameters
Input
Name Type Description
instrumentID ViSession Instrument identifier
channel ViInt32 1...Nchan
input ViInt32 = 0 set to input connection A
= 1 set to input connection B
Return Value
Name Type Description
status ViStatus Refer to Table 2-1 for error codes.
Discussion
This function is only of use for instruments with an input-multiplexer (i.e. more than 1 input per digitizer,
e.g. DP211). On the "normal" instruments with a single input per channel, this function may be ignored.
Programmer’s Reference Manual Page 89 of 210