User manual

Parameter String Returned
Type
Description
chan takes on the same values as 'channel' in
AcqrsD1_configTrigSource.
"OverloadStatus ALL"
ViInt32 Returns 1 if any of the signal or external trigger inputs is in
overload, 0 otherwise.
Use the "OverloadStatus chan " string to determine which
channel is in overload.
"PosInCrate"
ViInt32 Physical slot number (position) in cPCI crate
"SSRTimeStamp"
ViReal64 Current value of time stamp for Analyzers in SSR mode.
"TbNextSegmentPad"
ViInt32 Returns the additional array space (in samples) per segment
needed for the image read of
AcqrsD1_readData. It
concerns the data available after the next call to
AcqrsD1_acquire, as opposed to any current or past
acquisition with different conditions.
"TbSegmentPad"
ViInt32 Returns the additional array space (in samples) per segment
needed for the image read of
AcqrsD1_readData. It
concerns the current data available, as opposed to any
future acquisition with different conditions.
"Temperature m"
ViInt32 Temperature in degrees Centigrade (
o
C)
"TrigLevelRange chan"
ViReal64
Trigger Level Range on channel chan
“VersionUserDriver”
ViChar[ ] String containing the full driver version.
Discussion
The case of "LOGDEVHDRBLOCKmDEVnS string" is one in which several possible values of m, n, and
string are allowed. The single digit number m refers to the FPGA block in the module. For the moment this
must always have the value 1. The single digit number n refers to the FPGA device in the block. It can have
values in the range 1,2,3,4 depending on the module. Among the interesting values of string are the
following case-sensitive strings: "name", "version", "versionTxt", "compDate", "model".
Programmer’s Reference Manual Page 27 of 210