User manual

2.3.106 AcqrsT3_getAcqConditions
Purpose
Returns the current acquisition parameters of the Time-to-Digital Converter.
Parameters
Input
Name Type Description
instrumentID ViSession Instrument identifier
Output
Name Type Description
timeout ViReal64 Timeout in seconds
flags ViInt32 The LSB (bit 0) = 0 start timeout counter on Arm
= 1 start timeout counter on first
Common hit
reserved ViInt32 Currently unused, set to “0”
Return Value
Name Type Description
status ViStatus Refer to Table 2-1 for error codes.
Discussion
See remarks under AcqrsT3_configAcqConditions.
LabWindowsCVI/Visual C++ Representation
ViStatus status = AcqrsT3_getAcqConditions (ViSession instrumentID,
ViReal64* timeout,
ViInt32* flags, ViInt32* reserved);
LabVIEW Representation
Acqiris Tx.lvlib: (or Aq Tx) Query Acquisition Conditions.vi
MATLAB MEX Representation
[status timeoutP flagsP reservedP]= AqT3_getAcqConditions(instrumentID)
Programmer’s Reference Manual Page 196 of 210