User manual

2.3.103 AcqrsT3_configControlIO
Purpose
Configures the auxiliary I/O connectors.
Parameters
Input
Name Type Description
instrumentID ViSession Instrument identifier
connector ViInt32 Connector Number
1 = Front Panel I/O Aux 1
2 = Front Panel I/O Aux 2
13 = Front Panel Veto Input
signal ViInt32 See below
qualifier1 ViInt32 If the LSB (bit0) is set to 1 forces 50 Ohm termination
for the connector
qualifier2 ViReal64 Currently unused, set to “0.0”
Accepted Values of signal
Connector Type Possible Values of signal
Front Panel Aux I/O 0 = Disable
Veto:
1 = Veto
2 = Switch Veto - TC890
3 = Inverted Veto
4 = Inverted Switch Veto - TC890
Inputs:
TC840 TC890
16 = arm
17 = stop
1 = Bank switch
2 = Marker
Outputs:
TC840 TC890
48 = READY 32 = LVTTL low level
33 = LVTTL high level
Return Value
Name Type Description
status ViStatus Refer to Table 2-1 for error codes.
Programmer’s Reference Manual Page 192 of 210