User manual

2.3.100 AcqrsT3_acquire
Purpose
Starts an acquisition.
Parameters
Input
Name Type Description
instrumentID ViSession Instrument identifier
Return Value
Name Type Description
status ViStatus Refer to Table 2-1 for error codes.
Discussion
LabWindowsCVI/Visual C++ Representation
ViStatus status = AcqrsT3_acquire(ViSession instrumentID);
LabVIEW Representation
Acqiris Tx.lvlib: (or Aq Tx) Start Acquisition.vi
MATLAB MEX Representation
[status done]= AqT3_acquire(instrumentID)
Programmer’s Reference Manual Page 189 of 210