Specifications

47
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
4747
Up to 3 GHz (7 mm) SMD
EIA/EIAJ Size Shorting Bar Set (Furnished)
16197A-001 Shorting Bar
Options:
16197A-001: Add 0603 (mm)/0201 (inch) Device Guide Set
The 16197A’s electrode spaces are 0.5 mm, 1 mm, 1.5 mm and 2 mm
and the device guide matches these spaces with appropriate inser-
tion holes for the applicable SMD. The 0.2 mm electrode spacing is
available with option 001, which includes a device guide with 0603
mm/0201inch insertion holes, an electrode plate and 4 shorting
devices.
Compensation and Measurement: First of all, select the appropriate
device insertion hole. If the device insertion hole is not positioned in
the pressure arm’s contact range, reposition the device guide and
the electrode plate. Once this is prepared, perform compensation.
Open and short compensations are recommended in combination
with the electrical length compensation before measurement. The
fixture’s electrical length must be entered into the electrical length
Electrodes configuration and SMD size
Size P/N Qty.
1 x 0.5 x 0.5 (mm) 16191-29005 1
1.6 x 0.8 x 0.8 (mm) 16191-29006 1
2.0 x 1.2 x 0.8 (mm) 16191-29007 1
3.2 x 1.6 x 0.8 (mm) 16191-29008 1
Device Guide 16197-25007 1
Electrode Plate 16197-00604 1
Size P/N Qty.
0.6 x 0.3 x 0.3 (mm) 16197-29001 4