Specifications

19
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
19
Up to 110 MHz (4-Terminal Pair) Other Components
16089C Kelvin IC Clip Leads
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 4-Terminal
Cable Length (approx.):
1.3m (from connector to clip's tip)
Weight (approx.): 300 g
Additional Error: The additional error is
negligible when compared to the instrument's
accuracy.
Description: This test fixture makes it possible to measure odd-
shaped components that cannot be measured with conventional fix-
tures. It is equipped with two insulated Kelvin clips.
Applicable Instruments:4263B4268A*4284A*4285A4288A*
4294AE4980AE4981A**
*denotestheinstrumentisobsolete.
**applicableinalimitedreuencyrange.
Frequency: 5 Hz to 100 kHz
Maximum Voltage: ±42 V peak max. (AC+DC)
Operating Temperature: 0°C to 55°C
DUT Size:
See figure below
Furnished Accessories:
Compensation and Measurement: Open and short compensations
are recommended before measurement. For open compensation, do
not connect the Kelvin clips to anything. Short compensation is per-
formed by connecting the Kelvin clips together. After performing
open and short compensations, the DUT is held with the Kelvin clips.
16089D Kelvin Alligator Clip
Leads
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 4-Terminal
Cable Length (approx.):
0.94m (from connector to clip's tip)
Weight (approx.): 460 g
Additional Error: The additional error is
negligible when compared to the instrument's
accuracy.
Description: This test fixture makes it possible to
measure odd-shaped components that cannot be
measured with conventional fixtures. It is equipped with four alliga-
tor clips.
Applicable Instruments:4263B4268A*4284A*4285A4288A*
4294AE4980AE4981A**
*denotestheinstrumentisobsolete.
**applicableinalimitedreuencyrange.
Frequency: 5 Hz to 100 kHz
Maximum Voltage: ±42 V peak max. (AC+DC)
Operating Temperature: 0°C to 55°C
DUT Size: diameter of DUT's leads ≤ 5 mm
Furnished Accessories:
Compensation and Measurement: Open and short compensations
are recommended before measurement. For open compensation, do
not connect the alligator clips to anything. Short compensation is
performed by holding a shorting plate with the alligator clips. Make
sure that the alligator clips with the "V" markers are next to each
other. After performing open and short compensations, the DUT is
held with the alligator clips. Connect the same color test clips to the
same terminal of the DUT and have the clips with "V" markers be
closer to the DUT.
DUT Dimensions
Description P/N Qty.
Operating and Service Manual 16089-90020 1
Description P/N Qty.
Operating and Service Manual 16089-90020 1