Specifications

15
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
15
16044A Test Fixture
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 4-Terminal
Dimensions (approx.):
160(W) x 70(H) x 98(D) [mm]
Weight (approx.): 550 g
Additional Error:
f: [MHz]
15
Up to 110 MHz (4-Terminal Pair) SMD
Description: This test fixture is designed for impedance evaluations
of low impedance SMD. The minimum SMD size that this fixture is
adapted to evaluate is 1.6(L) x 0.8(W) [mm]. The 16044A has a
Kelvin (4-Terminal) contact, which ensures repeatable
measurements. It is also equipped with a mechanism for easily
performing open and short compensation.
Applicable Instruments:4263B4268A*4279A*4284A*4288A*
4338B*E4980AE4981A4285A4294A**
*denotestheinstrumentisobsolete.
**applicableinalimitedreuencyrange.
Frequency: DC to 10 MHz
Maximum Voltage: ±40 V peak max (AC+DC)
Operating Temperature: 0 °C to 55 °C
DUT Size: See figure below
Furnished Accessories:
To maintain the measurement precision, it is recommended that con-
tact pins be replaced approximately every 50,000 times (supplemen-
tary value).
Test fixture overview
Description P/N Qty.
Cleaning Rod 5182-7586 1
Operating and Service Manual 16044-90020 1
Type of Error Impedance
Proportional Error 2 x (f/10)
2
[%]
Open Repeatability 1.5 + 200 x (f/10) [nS]
Short Repeatablity 1.5 + 40 x (f/10) [mΩ]