Specifications

13
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
13
16034G Test Fixture
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 2-Terminal
Dimensions (approx.):
120(W) x 50(H) x 70(D) [mm]
Weight (approx.): 200 g
Additional Error:
f: [MHz]
13
Open compensation Short compensation
DimensionsDUT measurement
Description: This test fixture is designed for impedance evaluations of
SMD. The minimum SMD size that this fixture is adapted to evaluate is
0.6(L) x 0.3(W) [mm].
Applicable Instruments:4263B4268A*4279A*4284A*4285A4288A*
4294A, E4980A, E4981A, E50613-3L5 with Opt. E5061B-005
*denotestheinstrumentisobsolete.
Frequency: DC to 110 MHz
Maximum Voltage: ±42 V peak max. (AC+DC)
Operating Temperature: 0°C to 55°C
DUT Size: See figure below
Furnished Accessories:
Compensation and Measurement: Open and short compensations are
recommended before measurement. When measuring above 3 MHz, load
compensation is also recommended. Open compensation is performed by
separating the high and the low electrodes from each other. The separa-
tion size should be equivalent to the DUT’s width. Short compensation is
performed placing the high and low electrodes in contact together. Load
compensation is performed by using the furnished 100 Ω SMD chip resis-
tor. After performing open, short and load compensations, the DUT is
inserted into the test fixture. The following figures show how compensa-
tion and measurement are performed.
4284A with 16034G
Up to 110 MHz (4-Terminal Pair) SMD
Description P/N Qty.
Case for 100 Ω SMD Resistance 1540-0692 1
100Ω Chip Resistor 0699-2488 10
Operating Manual 16034-90011 1
Type of Error Impedance
Proportional Error 0.5 x (f/10)
2
[%]
Open Repeatability 5 + 500 x (f/10) [nS]
Short Repeatablity 10 + 13 x (f/10) [mΩ]