Specifications

12
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
12
16034E Test Fixture
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 2-Terminal
Dimensions (approx.):
128 (W) x 60 (H) x 71 (D) [mm]
Weight (approx.): 270 g
Additional Error:
f: [MHz]
12
Up to 110 MHz (4-Terminal Pair) SMD
Description: This test fixture is designed for impedance evaluations
of SMD. The minimum SMD size that this fixture is adapted to evalu-
ate is 1.6(L) x 0.8(W) [mm].
Applicable Instruments:4263B4268A*4279A*4284A*4285A
4288A*E4980AE4981AE5061B-3L5withpt.E5061B-005
4294A**
*denotestheinstrumentisobsolete.
**applicableinalimitedreuencyrange.
Frequency: DC to 40 MHz
Maximum Voltage: ±42 V peak max. (AC+DC)
Operating Temperature: 0°C to 55°C
DUT Size: See figure below
Furnished Accessories:
Compensation and Measurement: Open and short compensations
are recommended before measurement. Open compensation is per-
formed by separating the high and low electrodes from each other.
The separation should be equivalent in size to the DUT’s width.
Short compensation is performed by contacting the high and low
electrodes together. After performing open and short compensa-
tions, the DUT is inserted into the test fixture. The following figures
show how compensation and measurement are performed.
Open compensation
Short compensation
Inserting a DUT
Electrode dimensions
DUT Dimensions
Description P/N Qty.
Operating Manual 16034-90041 1
Type of Error Impedance
Proportional Error ±1.5 x (f/10)
2