Specifications

10
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
10
16047E Test Fixture
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 2-Terminal
Dimensions (approx.):
135 (W) x 40 (H) x 65 (D) [mm]
Weight (approx.): 200 g
Additional Error:
f: [MHz]
10
Up to 110 MHz (4-Terminal Pair) Lead Components
Test fixture overview
Connecting a shorting plate
Measuring 3-Terminal device
Description: This test fixture is designed for impedance evaluation
of lead type devices up to 110 MHz. A guard terminal is available for
three terminal devices and a shorting plate comes secured on this
fixture.
Applicable Instruments:4263B4268A*4279A*4284A*4285A
4288A*4294AE4980AE4981AE5061B-3L5withpt.E5061B-005
*denotestheinstrumentisobsolete.
Frequency: DC to 110 MHz
Maximum Voltage: ±42 V peak max.(AC+DC)
Operating Temperature: –20°C to 75°C
DUT Size: See figure below with 16047E’s electrode size.
Furnished Accessories:
Compensation and Measurement: Open and short compensations
are recommended before measurement. Short compensation is
performed by shorting the contacts of the test fixture with a shorting
plate. After performing open and short compensations, the DUT is
connected to the test fixture. The following figures show how
compensation and measurement are performed.
Type of Error Impedance
Proportional Error
f ≤ 15 MHz
0.2 x (f/10)
2
[%]
Proportional Error
f > 15 MHz
4 x (f/100)[%]
Open Repeatability 2 n+10 µ x (f/100) [S]
Short Repeatability 2 m+600 m x (f/100) [Ω]
Description P/N Qty.
Angle (right-side) 16047-01221 1
Angle (left-side) 16047-01222 1
Screws 0515-1229 4
Shorting Plate 16047-00621 1
Operating and Service Manual 16047-90040 1