Specifications

9
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
9
Up to 110 MHz (4-Terminal Pair) Lead Components
16047A Test Fixture
Terminal Connector: 4-Terminal Pair, BNC
DUT Connection: 4-Terminal
Dimensions (approx.):
124 (W) x 31 (H) x 62 (D) mm
Weight (approx.): 205 g
Additional Error:
f: [MHz]
Description: This test fixture is designed for impedance evaluation
of axial/radial lead type devices. The 16047A employs Kelvin con-
tacts which realize a wide impedance measurement range. The con-
tact tip can be changed according to the device shape.
Applicable Instruments:4263B4268A*4279A*4288A*E4980A
E4981A4284A*4285A4294A**
*denotestheinstrumentisobsolete.
**applicableinalimitedreuencyrange.
Frequency: DC to 13 MHz
Maximum Voltage: ±42 V peak max. (AC+DC)
Operating Temperature: 0°C to 55°C
DUT Size: See figure with module sizes.
Furnished Accessories:
Each module size for the 16047A is shown above.
Option:
16047A-701: Add Shorting Plate P/N 16047-00640
Compensation and Measurement: Select one of these modules
suitable for the DUT’s shape. Open and short compensations are
recommended before measurement. Short compensation is
performed by shorting the contacts of the test fixture with a shorting
plate. After performing open and short compensations, the DUT is
connected to the test fixture.
16047A module sizes
Shorting plate
P/N 16047-00640
Material:
Brass (Ni-dipped)
Thickness:
1.0 mm
Residual impedance:
20nH, 1mΩ
Description P/N Qty.
Module For Axial Lead 16061-70022 2
Module For Radial Lead mounting on fixture 16061-70021 2
Module For Short Radial Lead 16047-65001 2
Operating Note 16047-90011 1
Type of Error Impedance
Proportional Error ±5 x (f/10)
2