User`s manual

a. 100 µsec/msec MXIbus
System Controller Timeout
(VXI-MXI Non-Slot 0)
W8
d. Disable MXIbus System
Controller Timeout Generation
(Factory Default)
c. 400 µsec/msec MXIbus
System Controller Timeout
b. 200 µsec/msec MXIbus
System Controller Timeout
b. External Clock VXI-MXI
Installed in Slot 0
a.On-board 10 MHz VXI-MXI
Installed in Slot 0
(Factory Default)
W9
W10
c. Do Not Source CLK10; VXI-MXI
Not Installed in Slot 0 (VXI-MXI
Non-Slot 0)
Figure 3-8. CLK10 Source Signal Options
Figure 3-9. MXIbus System Controller Timeout Selection
3-8 Set Up the System for Multiple Mainframes C-Size Configuration Guide