User`s manual

MXIbus-1 : Set Up VXI-MXI Modules for Slot 0
The VXI-MXI module is shipped from the factory configured for slot 0
operation. The VXI-MXI module should be configured for slot 0 operation
in the following applications:
• when installed in extender mainframe 2 and 3
• when using the Agilent RADI-EPC7 Embedded Computer
• when using an external computer (e.g. HP 9000 Series 700) with an
EISA/ISA to MXIbus interface card
Figure 3-2. Slot 0 VXI-MXI Settings (DEFAULT)
3-4 Set Up the System for Multiple Mainframes C-Size Configuration Guide