User`s manual

EPC7-5 : Connect Interface Cables
Connect the cable from the monitor and the keyboard to the EPC7. Tighten
the screws on the connector.
NOTE The monitor requires an EXM-6 or EXM-13 video controller module. VGA
compatible and multiscan monitors can be used with the EXM-6 and
EXM-13. Consult the reference manuals on these modules for more
information.
EPC7
Computer
Keyboard
Monitor
Agilent E1401 Mainframe
Figure 2-47. Connecting Cables
2-60 Setting Up an Embedded RADI-EPC7 Computer C-Size Configuration Guide