User`s manual

V743-4 : Apply Power
To verify that the V743 controller and software are correctly installed, turn
on the mainframe. If the SICL software is installed, the system resource
manager (ivxirm) function begins. To view the contents of the configuration
file (/usr/pil/etc/vxiLU/rsrcmgr.out) written to by ivxirm, type the following
command:
ivxisc /usr/pil/etc/vxiLU
Where LU is the logical unit number of the VXI interface. An example of
the V743 configuration sequence is shown in Figure 2-38.
Note The information in this step assumes the HP-UX VXI configuration utilities
referred to are in the /usr/pil/bin/ directory, and that your system includes a
path to that directory. Refer to the Agilent SICL Installation and User’s
Guide for more information.
VXI Current Configuration:
VXI BUS: 0
Device Logical Addresses: 0 24 127 128
Slots: 0123456789101112
-- -- -- -- -- -- -- -- -- -- -- -- --
Empty OOOOO OO O O
Single Device X X
Multiple Devices X
VME
V
Failed
VXI Device Table:
Name LADD Slot Bus Manufacturer Model
--------- -------- ------ ------ -------------------- ----------
v743ctlr 0 0 0 Agilent Technologies E1497 Series 700 VXI Controller
dmm 24 9 0 Agilent Technologies E1410 DMM
translator
127 6 0 Agilent Technologies E1404 Translator Module
msgtrans 128 6 0 Agilent Technologies E1404 Translator Message Interface
VME Device Table:
Name Bus Slot Space Size
-------- ----- ----- --------- ------
memdev 0 12 A24 512K
Failed Devices:
Name Bus Slot Manufacturer Model
--------- ----- ----- --------------------- ----------
No FAILED devices detected.
Figure 2-38. V743 Configuration Sequence
C-Size Configuration Guide Setting Up an Embedded V743 Controller 2-45