User`s manual

Series 700-5 : Apply Power

To verify that the E1482B VXIbus extender module and the MXIbus and

INTX cables are correctly installed, turn on the mainframe. This starts the

system resource manager function (ivxirm) provided by the Agilent E1489I

MXIbus Controller Interface card and the Agilent E2093B SICL software.

To view the contents of the configuration file (rsrcmgr.out) written to by the

resource manager, type the following command:

/usr/pil/bin/ivxisc (HP-UX)

IVXISC (from the directory the resource manager executes from)

An example of the configuration file (sequence) with only the E1482B

installed is shown in Figure 2-21.

2-30 Setting Up a Series 700 Computer C-Size Configuration Guide