User`s manual

Note When using the Agilent E1406A Command Module with the HP Series 700
computer, an interrupt line other than line 1 is assigned to the Command
Module. In order for the Command Module and the instruments in its
servant area to function properly, the devices must use the same interrupt
line. Refer to "Assigning Interrupt Lines" in step Series 700-5: "Apply
Power" for more information.
Agilent E1406A
switch location
Figure 2-19. Disabling the E1406A VMEbus Time OutCapability
C-Size Configuration Guide Setting Up a Series 700 Computer 2-27