User`s manual

Setting Up an Embedded V743 Controller . . . . . . . . . . . . . . . . . . . . . . . . 2-35
V743-1 : The V743 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35
The V743 Logical Address and Servant Area . . . . . . . . . . . . . . . . . . . . . 2-37
V743-2 : Set Up the Agilent E1406A Command Module . . . . . . . . . . . . . . . 2-37
V743-2A : Setting the Command Module Logical Address . . . . . . . . . . . . . . 2-38
V743-2B : Setting the Command Module Servant Area . . . . . . . . . . . . . . . . 2-39
V743-2C : Setting the Command Module Primary GPIB Address . . . . . . . . . . 2-40
V743-2D : Disabling the Command Module’s Slot 0 Capability . . . . . . . . . . . 2-41
V743-3 : Install the V743 Controller in the Mainframe . . . . . . . . . . . . . . . . 2-42
Installing the E1406A Command Module . . . . . . . . . . . . . . . . . . . . . . . 2-44
V743-4 : Apply Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
V743-4A : Enabling Shared Memory . . . . . . . . . . . . . . . . . . . . . . . . . 2-46
V743-4B : Assigning Interrupt Lines . . . . . . . . . . . . . . . . . . . . . . . . . 2-47
V743-5 : Where To Go Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Setting Up an Embedded Agilent RADI-EPC7 486 Computer . . . . . . . . . . . . . . 2-49
EPC7-1 : Set the EPC7 as Slot 0 Device . . . . . . . . . . . . . . . . . . . . . . . . 2-50
EPC7-1A : Set the EPC7 as Non-Slot 0 Device if Using Multiple Mainframes . . . 2-51
EPC7-2 : Install the EPC7 into the Mainframe . . . . . . . . . . . . . . . . . . . . 2-52
EPC7-3 : Install EXM Expansion Modules . . . . . . . . . . . . . . . . . . . . . . 2-54
EPC7-4 : Configure the Command Module to Work with the EPC7 . . . . . . . . . 2-55
EPC7-4A : Set the Command Module’s Logical Address . . . . . . . . . . . . . . . 2-56
EPC7-4B : Set the Command Module’s Servant Area . . . . . . . . . . . . . . . . 2-57
EPC7-4C : Set the Command Module’s Primary GPIB Address . . . . . . . . . . . 2-58
EPC7-4D : Disable the Command Module’s slot 0 and System Controller
Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59
EPC7-5 : Connect Interface Cables . . . . . . . . . . . . . . . . . . . . . . . . . . 2-60
EPC7-6 : Apply Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-61
EPC7-7 : Where To Go Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-63
Procedure 3:
Set Up the System for Multiple Mainframes
MXIbus-1 : Set Up VXI-MXI Modules for Slot 0 . . . . . . . . . . . . . . . . . . 3-4
MXIbus-2 : Set VXI-MXI Modules for Non-Slot 0 . . . . . . . . . . . . . . . . . 3-5
MXIbus-3 : Remove the Terminating Networks from Middle VXI-MXI Modules . 3-9
MXIbus-4 : Set the VXI-MXI Module’s Logical Address . . . . . . . . . . . . . . 3-10
MXIbus-5 : Disable the VMEbus Timeout on Other Modules (VME BTO) . . . . . 3-20
MXIbus-6 : Install VXI-MXI Modules into Mainframes . . . . . . . . . . . . . . . 3-22
MXIbus-7 : Connect Interface Cables . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
MXIbus-8 : Apply Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
MXIbus-9 : Where To Go Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Procedure 4:
Configure and Install Instruments
Step-1 : Download Instrument Drivers . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Step-2 : Set Instrument Logical Addresses . . . . . . . . . . . . . . . . . . . . . . 4-4
Step-3 : Install A- and B-Size Modules . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Step-4 : Install C-Size Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Step-5 : Install a Chassis Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Step-6 : Install Backplane Connector Shields . . . . . . . . . . . . . . . . . . . . . 4-15
Step-7 : Install Faceplate Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Step-8 : Where To Go Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
2 C-Size VXIbus Configuration Guide Contents