User`s manual

RS-232 Connections The Command Module has a 9-pin DTE RS-232 connector. You can
connect a terminal or PC to the Command Module using the RS-232
interface as shown in the following figure. Such connections can display the
25 Pin
Connector
9 Pin
Connector
E1401A Mainframe
E1406A
Command
Module
Figure 2-11. Connecting a Display Terminal
E1406A
Command
Module
E1401A Mainframe
9 Pin Connector
HP 24542U
(24540-80014)
Personal Computer with RS-232
9 Pin
Connector
Figure 2-10. Connecting a PC to the Command Module
2-12 Setting Up the E1406 Command Module C-Size Configuration Guide