User`s manual

What are
Downloadable
Instrument Drivers?
Instrument drivers enable Agilent Technologies register-based modules to
be programmed using SCPI commands. The following table lists the
Agilent E1406A Command Module’s factory-installed instrument drivers.
Agilent E1406/05 Factory-Installed Instrument Drivers
(Register-Based Modules)
System Instrument
Agilent E1326B/E1411B 5 1/2-Digit Multimeters
Agilent E1328A 4-Channel D/A Converter
Agilent E1330B Quad 8-Bit Digital Input/Output
Agilent E1332A 4-Channel Counter/Totalizer
Agilent E1333A 3-Channel Universal Counter
Switch Cards Multiplexers, Matrix, General Purpose
Drivers that are not factory-installed ship with the register-based module.
The easiest way to download drivers to the Command Module is to use
Agilent VIC or the driver download utility that is included with Agilent
VIC.
If you do not have Agilent VIC or the download utility, instructions for
downloading the drivers are contained in the "Downloading Device Drivers
Installation Note" (p/n E1401-90021).
If a driver is not installed, the resource manager will report the following
message at the end of the power-on sequence.
WARNING: DEVICE DRIVER NOT FOUND
Note Agilent VIC (Agilent VXI Installation Consultant) ships with the Agilent
E1406A Command Module on a 3.5" flexible disk.
C-Size Configuration Guide Terms and Definitions A-11