User`s manual

Agilent RADI-EPC7
Embedded 486
Computer
When power is applied to the mainframe, the Start-Up Resource Manager
(SURM) on the Agilent RADI-EPC will execute. An example of the
EPC7 configuration sequence is shown in Figure 5-4.
Use the Pg Up/Pg Dn keys to view the entire configuration. Pay particular
attention to the Slot Reporting and ULA (Unique Logical Address). These
items will help you confirm a proper installation. Press ESC to exit the
EPC7 Start-up Resource Manager.
NOTE Refer to the EPConnect/VXI for DOS User’s Guide for more information on
the Agilent RADI-EPC7 resource manager configuration sequence and for
information on configuration and start up errors.
Interrupt Request Lines:
Handler Interrupter
Name 1 2 3 4 5 6 7 1 2 3 4 5 6 7
- - - - - - - - - - - - - - - - - -
V743ctrl X X X X X X
dmm
translator
msgtrans X X
Figure 5-3. V743 Configuration Sequence (Cont’d)
C-Size Configuration Guide Applying Power 5-9