User`s manual

Agilent E1497A/
E1498A Embedded
V743 Controller
To verify that the V743 controller-based system is installed correctly, turn
on the mainframe. If configured, this starts the system resource manager
(ivxirm) provided by the V743. To view the contents of the configuration
file (/usr/pil/etc/vxiLU/rsrcmgr.out) written to by ivxirm, type the following
command:
ivxisc /usr/pil/etc/vxiLU
Where LU is the logical unit number of the VXI interface. An example of
the V743 configuration sequence is shown in Figure 5-3.
C-Size Configuration Guide Applying Power 5-7