User`s manual

CAUTION It is your responsibility to ensure adequate cooling is supplied
to all modules installed in the mainframe. Section B.7.2.4 of the
VXIbus Specification (Revision 1.3) discusses module cooling
requirements. Section B.7.3.5 discusses mainframe cooling
requirements.
NOTE When installing VME devices in the Agilent 75000 Series C mainframe, the
devices must not be in conflict with the A24/A32 addresses allocated by the
Command Module when functioning as the resource manager. Refer to the
Agilent E1406 user’s manual for information on A24/A32 address mapping.
4-2 Configure and Install Instruments C-Size Configuration Guide