User`s manual

MXIbus-7 : Connect Interface Cables
NOTE If you are using an EPC7 embedded computer or an external computer with
an EISA/ISA to MXIbus interface card, the VXI-MXI module in mainframe 1
needs to be installed in slot 0 (and configured as a slot 0 device). The
EPC7 will then be installed in slots 1 and 2.
MXIbus
Cable
INTX
Cable
VXI-MXI Module in
Slot 0
Agilent E1406A
Command Module
in Slot 0
VXI-MXI Module
in slot 1
Figure 3-23. Connecting Multiple Mainframes
3-24 Set Up the System for Multiple Mainframes C-Size Configuration Guide