User`s manual

Attaching a Terminal Module to the Breadboard
Extend the extraction levers on the
Align the terminal module connectors to the
Agilent E1490C breadboard module.
Apply gentle pressure to attach the
terminal module to the breadboard module.
Push in the extraction levers to
lock the terminal module onto the
breadboard module.
To remove the terminal module from the Agilent E1490C
breadboard, use a small screwdriver to release the two extraction
levers. Push both levers out simultaneously to free the terminal
module from the breadboard module.
Figure 2-18. Attaching a Terminal Module to the Breadboard
Chapter 2 Configuring the Agilent E1490C 31