User`s manual

In Figure 2-9 the standoffs are installed between the PC board and the top
shield. The 30 mm hex standoff shown may also be ordered from the
address shown in Figure 2-10. With the recommended standoffs installed,
this configuration extends the maximum component height above the circuit
board from 18 mm (0.71 inch) to 48 mm (1.89 inch). Eight standoffs are
required per module (all eight standoffs are installed on the same side of the
PC board).
Manufacturer’s Address:
AMATOM
446 Blake Street
New Haven, CT 06515
1-800-243-6032
Quantity Required: 8 per module
Figure 2-9. Agilent E1490C with Tall Standoffs Added
Figure 2-10. Dimensions of Amatom’s 19979-SS-350 Standoff
Chapter 2 Configuring the Agilent E1490C 21