User`s guide

Agilent B2900 User’s Guide, Edition 2 3- 17
Installation
Connecting a DUT
NOTE Performing high voltage measurement
When the Digital I/O interlock terminal is open, B2900 cannot apply high voltage
over 42 V. To perform high voltage measurements, B2900 must be connected to
the interlock circuit installed in 16442B.
Prepare the N1294A-011 or 012 interlock cable, and connect it between the B2900
Digital I/O connector and the 16442B Intlk connector. B2900 can apply a high
voltage when the test fixture lid is closed.
WARNING Potentially hazardous voltages of up to 210 V may be present at the High
Force, High Sense, and Guard terminals when the 16442B test fixture lid is
closed. To prevent electrical shock, do not expose these lines.