User`s guide

Agilent B2900 User’s Guide, Edition 2 3- 5
Installation
Installing the Agilent B2900
Installing the Agilent B2900
This section describes information you must pay attention to when installing the
Agilent B2900.
• “Safety Considerations”
• “Environment”
• “Connecting the Power Cord”
• “Setting the Power Line Frequency”
• “Bench Installation”
• “Rack Installation”
Safety Considerations
Refer to the Safety Summary page at the beginning of this guide for general safety
information. Before installation or operation, check the B2900 and review this guide
for safety warnings and instructions. Safety warnings for specific procedures are
located at appropriate places throughout this guide.
Environment
WARNING Do not operate the instrument in the presence of flammable gasses or fumes
Environmental conditions for B2900 are documented in “General Specifications” on
page 2-27. In principle, B2900 should only be operated indoors in a controlled
environment.
The dimensions of B2900 are also given in “General Specifications”. Fan cools the
instrument by drawing air through the sides and exhausting it out the back. The
instrument must be installed in a location that allows sufficient space at the sides
and back of the instrument for adequate air circulation.
Connecting the Power Cord
WARNING FIRE HAZARD: Use only the power cord supplied with your instrument.
Using other types of power cord may cause overheating of the power cord,
resulting in fire.