User`s guide

Agilent B2900 User’s Guide, Edition 2 2- 21
Introduction
Specifications
Measurement Supplemental Characteristics
• Temperature coefficient (0 C to 18 C and 28 C to 50 C):
(0.1  Accuracy specification) / C
•Over range:
102 % of measurement range for 1.5 A and 3 A ranges. 106 % of measurement
range other than 1.5 A and 3 A ranges.
• Voltage measurement range change overshoot:
< 250 mV. 100 k load, 20 MHz bandwidth
• Current measurement range change overshoot:
< 250 mV/R load, 20 MHz bandwidth
• Derating accuracy for measurement speed less than 1 PLC:
Add % of range using Table 2-14 for measurement with PLC < 1.
Triggering and Timing Specifications
Triggering (Supplemental Characteristics)
• Digital I/O trigger in to trigger out:  5 s
• Digital I/O trigger in to source change:  5 s
• LXI trigger in to source change:  200 s
Timer
• Trigger timing resolution: 1 s to 100 ms
• Timer accuracy: 50 ppm
• Arm/trigger delay: 0 to 100000 s
• Arm/trigger interval:
• B2901A/B2902A: 20 s to 100000 s
• B2911A/B2912A: 10 s to 100000 s
• Arm/trigger event: 1 to 100000
• Time stamp: TIMER value automatically saved when each measurement is
triggered.