User`s guide

2- 16 Agilent B2900 User’s Guide, Edition 2

Introduction

Specifications

This chapter lists specifications and supplemental information for the Agilent

B2900 series. The specifications are the standards against which the B2900 is tested.

When the B2900 is shipped from the factory, it meets the specifications.

Specification Conditions

The source and measurement accuracy are specified under the conditions listed

below.

1. Temperature: 23 C ± 5 C

2. Humidity: 30 % to 80 % RH

3. After 60 minutes warm-up

4. Ambient temperature change less than ± 3 C after self-calibration execution

5. Calibration period: 1 year

6. Measurement speed: 1 PLC (Power Line Cycle)

Maximum Voltage and Current

• Voltage output range: See Figure 2-2, Table 2-3, and Table 2-4.

• Current output range: See Figure 2-2, Table 2-2, and Table 2-4.

Source Specifications

• Voltage source specifications: See Table 2-8.

• Current source specifications: See Table 2-9.

Measurement Specifications

• Voltage measurement specifications: See Table 2-10.

• Current measurement specifications: See Table 2-11.