User`s guide

Agilent B2900 User’s Guide, Edition 2 2- 7

Introduction

Rear View

This section describes the rear view of the Agilent B2900 series.

• Channel 2 source/measure terminals

Only on 2-channel models. Terminals for SMU channel 2. High Force, Low

Force, High Sense, Low Sense, Guard, and chassis ground. For details, see

“Connecting a DUT” on page 3-10

CAUTION Never connect the Guard terminal to any output, including circuit common, chassis

ground, or any other guard terminal. Doing so will damage the B2900.

CAUTION Do not apply current to the chassis ground terminal. Doing so will damage the

B2900.

• GPIB interface connector

Use an Agilent 82357A/B USB/GPIB interface or Agilent 10833A/B/C/D GPIB

cable to connect to an external computer or equipment.

• Cooling fan

• AC input connector

AC power cord is connected to this receptacle.

• LAN interface connector

Connects to 10/100 Base-T interface. Left LED indicates activity. Right LED

indicates link integrity.

