User`s guide

Agilent B2900 User’s Guide, Edition 2
Contents
Setting the Connection Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
Setting the Low Terminal State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
Enabling or Disabling the High Capacitance Mode . . . . . . . . . . . . . . . . . . . . . . . . 5-16
Enabling or Disabling the Over Voltage/Current Protection . . . . . . . . . . . . . . . . . 5-16
Specifying the Output-Off Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16
Enabling or Disabling the Automatic Output-On Function . . . . . . . . . . . . . . . . . . . 5-17
Enabling or Disabling the Automatic Output-Off Function. . . . . . . . . . . . . . . . . . . 5-17
Setting the Ranging Mode of the Sweep Source . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Setting the Sweep Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Setting the Source Output Value after Sweep . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Controlling the Measurement Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
Enabling the Resistance Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
Setting the Measurement Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Performing Spot Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Stopping Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Setting the Measurement Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Setting the Measurement Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Performing Sweep Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Setting the Measurement Trigger Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22
Setting the Measurement Wait Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Setting the Measurement Auto Range Operation . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Enabling or Disabling the Resistance Compensation . . . . . . . . . . . . . . . . . . . . . . . 5-24
Using the Math Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
Performing the Limit Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
Setting the Composite Limit Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
Setting Individual Limit Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
Displaying the Limit Test Result. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29
Using the Trace Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Setting the Trace Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Displaying the Statistical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31