User`s guide

Agilent B2900 User’s Guide, Edition 2 5- 31
Front Panel Operations
Using the Trace Buffer
Displaying the Statistical Data
For details on the setup parameters, see “Trace Statistical Result dialog box” on
page 4-40.
1. Press the Result > Trace function keys.
The Trace Statistical Result dialog box is displayed.
2. In the Ch field, set the channel for the data to be displayed.
3. In the Element field, set SOURCE (source output data), VOLTS (voltage
measurement data), AMPS (current measurement data), OHMS (resistance
measurement data) for the data type of the statistical calculation.
The statistical data for the data specified here is displayed in the area below the
Length field.
4. Press OK to close the dialog box.
The Length field displays the number of data.
The statistical data is displayed in the following fields:
Mean: Mean value
Std. Dev.: Standard deviation
Min.: Minimum value
Max.: Maximum value