User`s guide

5- 24 Agilent B2900 User’s Guide, Edition 2
Front Panel Operations
Controlling the Measurement Function
Enabling or Disabling the Resistance Compensation
1. Press the Config > Measure > R Compen function keys.
2. Specify the channel to which the setting change is applied.
ALL: Channels 1 and 2 (Ch 1 and Ch 2)
Ch 1: Channel 1 (Ch 1) only
Ch 2: Channel 2 (Ch 2) only
3. To enable the resistance compensation, press ON. To disable it, press OFF. To
cancel the setting change, press the Cancel/Local key.