User`s guide

Agilent B2900 User’s Guide, Edition 2 5- 17
Front Panel Operations
Controlling the Source Output
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
Enabling or Disabling the Automatic Output-On
Function
For details on this function, see “Automatic Output-ON/OFF Function” on page
6-14.
1. Press the Config > Source > Connection function keys.
The Output Connection dialog box is displayed.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set ON (enable) or OFF (disable) in the Auto Output-On field.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
Enabling or Disabling the Automatic Output-Off
Function
For details on this function, see “Automatic Output-ON/OFF Function” on page
6-14.
1. Press the Config > Source > Connection function keys.
The Output Connection dialog box is displayed.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set ON (enable) or OFF (disable) in the Auto Output-Off field.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
Setting the Ranging Mode of the Sweep Source
For details on this function, see “Ranging Mode” on page 6-4.
1. Press the Config > Source > Sweep function keys.