User`s guide

Agilent B2900 User’s Guide, Edition 2 5- 7
Front Panel Operations
Configuring Various Settings
4. Press OK to perform the self-calibration. To cancel the operation, press the
Cancel/Local key.
Setting the Operations at Power On
1. Press the More > System > More > Start-up function keys.
The System Start-up dialog box is displayed.
2. See “Start-up” on page 4-50 to set each parameter.
Displaying the Error Message
1. Press the More > System > Error function keys.
2. Press Log.
The error message is displayed in the Error Log dialog box.
3. Press OK to close the dialog box.
Clearing the Error Buffer
1. Press the More > System > Error function keys.
2. To clear the error buffer, press Clear. To cancel the operation, press the
Cancel/Local key.
Clearing Timestamp
1. Press the More > System > Timestamp function keys.
2. Press Clear. The Confirmation dialog box is displayed.
3. To perform the operation, press OK. To cancel the operation, press the
Cancel/Local key.
Setting the Automatic Clear of Timestamp
1. Press the More > System > Timestamp function keys.
2. Press Auto CLR.
3. To enable the automatic clear, press ON. To disable it, press OFF. To cancel the
setting change, press the Cancel/Local key.